Before the process starts flashing, you must first prepare equipment and material .... !!!
Tools and materials :
- SP Flash Tool v5.1343.01 HERE
- Stock ROM Evercoss A7E + HERE
- MTK VCOM Driver HERE
- MTK 65xx Driver HERE
- USB Cable
- Smartphone which will repair (of course Evercoss A7E +)
Note : To simplify the process of flash, place the ingredients that have been downloaded into one folder
-Before Do flashing, we need to know the firmware version number and build what we are going to flash, to minimize BOOTLOP OR PHONE OFF AFTER FLASHING, for I know the firmware that matches our smartphones click here
Further to the tutorial.......
1. Make sure we have installed the USB driver COM MTK. To make sure the drivers running properly can be checked in the Devices Manager ... see picture below
2. Open SP Flashtool. At "Scatter-loading File" Scatter-loading Click button on the right to enter the flashtool scatter, scatter files in the folder firmware / Stock Rom
3. In the state of dead phones connect usb cable with komputer.Click button "Download"
4. Proses running
5. If Flasing process is completed / Finish image will appear to tick on it reads 'Download OK'
6. Done ... congratulations you've managed to flash
Caution: Follow the steps,
-We just share a tutorial, all the problems that occur after the flashing outside our responsibility (Risk In Individual responsibility)
=======================================================================
-The Flash Evercoss A7E + with SP Flashtool
-How Overcoming Evercoss A7E + Bootlop
-Improve Mobile Evercoss A7E that hardbrick
Flashing -Tutorial Evercoss A7E + with image
-How To Flash Evercoss A7E +
-Step By step flashing Evercoss A7E +
0 Response to "Tutorial Flashing Evercoss A7E + (Plus)"
Post a Comment